Fly-over Medicine Cabinet Installation Instructions
Home > Instructions > Flyover Medicine Cabinet Installation
BEFORE YOU BEGIN PLEASE READ THESE SAFETY PRECAUTIONS
  • Hanging this medicine cabinet will require more than one person to do the job.
  • The most secure way to hang your medicine cabinet is with the screws provided, through the back of the cabinet and into the wall studs. Toggle or molly bolts are not recommended.
  • Because the mirror set screws on the pivot hinges could come loose during transit, they should be checked and tightened if necessary. To avoid breaking mirror, do not over-tighten mirror screws.
  1. Attach the Fly-Over Light Bar to the Medicine Cabinet with the screws provided as illustrated in figure A.
  2. Locate wall studs.
  3. Drill 3/16" holes through the back of the medicine cabinet to align with the wall studs.
  4. Be sure the medicine cabinet is level.
  5. Insert mounting screws (provided) through holes and secure to wall studs as illustrated in figure B.
  6. 110 volt electrical outlet is neessary.
  7. Plug the light bar into the outlet.
MIRROR ADJUSTMENTS:

To align mirrors: Loosen set screws on pivot hinges at top and bottom of the mirror door. Adjust the mirror and carefully re-tighten screws. Over-tightening could break the mirror.
If you have a particular question that is not addressed in these instructions please contact us.
Download PDF Version